Skip to main content
Journal of Materials Science: Materials in Engineering
Journal of Materials Science: Materials in Engineering Cover Image

Articles

Page 2 of 4

  1. Friction stir welding (FSW) of 6-mm-thick plates of AA6061-T651 was carried out using a simple cylindrical pin tool. The impact of welding factors (rotational speed, welding speed) on tensile properties, micro...

    Authors: Rajesh Kumar Bhushan and Deepak Sharma
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:7
    Content type: Original Paper Published on:

  2. Friction stir welding (FSW) is a solid-state welding technique, which two workpieces join by pressure and large plastic deformation near their melting points. The tool offset, pin offset, and position of dissi...

    Authors: Amir Ghiasvand, Mahdi Kazemi, Maziar Mahdipour Jalilian and Hossein Ahmadi Rashid
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:6
    Content type: Original Paper Published on:

  3. The machining capability of metal composites is different compared to other materials because of their specific physical and mechanical properties. The aluminum composite A413 reinforced with Alumina powder is...

    Authors: Mojtaba Shahbazi Dastjerdi, Ali Mokhtarian and Payam Saraeian
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:5
    Content type: Original Paper Published on:

  4. Composite material is being used in vehicles for protective structures against blast loading. Limited data is available which compare experimental works and numerical analysis in the open field environment. Mo...

    Authors: Kasmidi Gunaryo, Heri Heriana, M. Rafiqi Sitompul, Andi Kuswoyo and Bambang K. Hadi
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:4
    Content type: Original Paper Published on:

  5. The axisymmetric problem in two-dimensional transversely isotropic magneto-thermoelastic (TIMT) solid due to inclined load with Green–Naghdi (GN)-III theory and two temperature (2T) has been studied. The Lapla...

    Authors: Iqbal Kaur and Parveen Lata
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:3
    Content type: Original Paper Published on:

  7. This work aims for a novel thermoelastic analysis methodology based on experimental steady-state temperature data and numerical displacement evaluation. The temperature data was acquired using thermal imaging ...

    Authors: Matheus B. A. M. Oberg, Daniel F. de Oliveira, Jhon N. V. Goulart and Carla T. M. Anflor
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:1
    Content type: Original Paper Published on:

  8. Functionally graded material shafts are the main part of many modern rotary machines such as turbines and electric motors. The purpose of this study is to present an analytical solution of the elastic-plastic ...

    Authors: Shams Torabnia, Sepideh Aghajani and Mohammadreza Hemati
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:16
    Content type: Original Paper Published on:

  9. This paper studied the in-plane elastic stability including pre and post-buckling analysis of curved beams considering the effects of shear deformations, rotary inertia, and the geometric nonlinearity due to l...

    Authors: M. Zare and A. Asnafi
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:15
    Content type: Original Paper Published on:

  10. In this research, geometric parameters were given in dimensionless form by the Buckingham pi dimensional analysis method, and a series of dimensionless groups were found for deep drawing of the round cup. To f...

    Authors: Saeed Hajiahmadi, Majid Elyasi and Mohsen Shakeri
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:14
    Content type: Original Paper Published on:

  11. This review of MRF (magnetorheological fluids or MR fluids) brings out the challenges in methods of preparation, difficulties encountered in storage and use, and possible solutions to overcome the challenges.

    Authors: James Sathya Kumar, P. Sam Paul, Girish Raghunathan and Divin George Alex
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:13
    Content type: Review Article Published on:

  12. The present research deals with the propagation of Rayleigh wave in transversely isotropic magneto-thermoelastic homogeneous medium in the presence of mass diffusion and three-phase-lag heat transfer. The wave...

    Authors: Iqbal Kaur and Parveen Lata
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:12
    Content type: Original Paper Published on:

  13. The laminar 2-D blended convection of the nanofluids at different volume fractions has gained interest in the last decade due to an enormous application in technology. The laminar-flow stream system can be fur...

    Authors: Ali Assim Al-Obaidi, Ali J. Salman, Ali Raheem Yousif, Dalya H. Al-Mamoori, Mohamed H. Mussa, Tayser Sumer Gaaz, Abdul Amir H. Kadhum, Mohd S. Takriff and Ahmed A. Al-Amiery
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:11
    Content type: Original Paper Published on:

  14. The present research deals with the deformation in transversely isotropic thermoelastic (TIT) thin circular plate. Rotation effect is studied under thermally insulated as well as isothermal boundaries. The Lap...

    Authors: Iqbal Kaur and Parveen Lata
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:10
    Content type: Original Paper Published on:

  15. A progressive trend in instructional materials is the analytical plan and manufacture of fundamental operating equipment. LDPE/Gr nanocompounds were researched using various techniques such as Raman spectra (R...

    Authors: Maziyar Sabet and Hassan Soleimani
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:9
    Content type: Original Paper Published on:

  16. Experimental studies have been carried out to establish the possibility of using vibratory machining technology through shock-wave transmission for oxide coating preparation on aluminum-alloyed machine compone...

    Authors: Dieudonné Essola, Jean Chills Amba, Claude Valery Ngayihi Abbe, Joseph Nkongho Anyi and Vladimir Vitalevich Ivanov
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:8
    Content type: Original Paper Published on:

  17. The effectiveness of different methods, schemes, algorithms, and approaches is of substantial challenging problems in numerical modeling of transport phenomena. In the present paper, a lid-driven cavity proble...

    Authors: A. A. Boroujerdi and M. Hamzeh
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:7
    Content type: Original Paper Published on:

  18. The aim of this study was to establish the effect of cross bore configuration geometry on stress concentration in cross-bored high-pressure vessels. The cross bore geometry parameters with adverse effects on s...

    Authors: P. K. Nziu and L. M. Masu
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:6
    Content type: Review Article Published on:

  19. Stable and high surface area zirconium oxide nanoparticles have been synthesised by means of the hydrothermal method. The Brunauer–Emmett–Teller results show that a high surface area of 543 m2/g was obtained in t...

    Authors: Rudzani Sigwadi, Mokhotjwa Dhlamini, Touhami Mokrani and Fulufhelo Nemavhola
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:5
    Content type: Original Paper Published on:

  21. This study was conducted to investigate the synergistic effects of cutting parameters on surface roughness in ball end milling of oxygen-free high conductivity (OFHC) copper and to determine a statistical mode...

    Authors: Asiful H. Seikh, Biplab Baran Mandal, Amit Sarkar, Muneer Baig, Nabeel Alharthi and Bandar Alzahrani
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:3
    Content type: Original Paper Published on:

  22. This paper aimed to study the influence of zirconium phosphate (ZrP) nanoparticles on reducing the diameter of nanofibres during electrospinning. Addition of metal oxide such as zirconium phosphate decreases t...

    Authors: R. Sigwadi, M. S. Dhlamini, T. Mokrani and F. Nemavhola
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:2
    Content type: Original Paper Published on:

  23. In the machining operations, final surface finish and dimensional accuracy are the most specified customer requirements. Hard turning machining operation using cubic boron nitride tool as an alternative of gri...

    Authors: Sasan Yousefi and Mehdi Zohoor
    Citation: International Journal of Mechanical and Materials Engineering 2019 14:1
    Content type: Original Paper Published on:

  24. The primary function of a suspension system is to isolate the vehicle body from road irregularities thus providing the ride comfort and to support the vehicle and provide stability. The suspension system has t...

    Authors: Mahesh P. Nagarkar, Yogesh J. Bhalerao, Gahininath J. Vikhe Patil and Rahul N. Zaware Patil
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:10
    Content type: Original Paper Published on:

  25. The theoretical investigation of the rapid sintering mechanism under pulse electric current sintering has no unified understanding. Especially for non-conductive powder, since there is no current flowing direc...

    Authors: Zhang Long and Zheng Heng-wei
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:9
    Content type: Original Paper Published on:

  27. The aim of this study is to propose a method for studying the free transverse vibration of the human lumbar spine using Timoshenko and Euler–Bernoulli beam theories.

    Authors: H. Asgharzadeh Shirazi, M. Fakher, A. Asnafi and S. Hosseini Hashemi
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:7
    Content type: Original Paper Published on:

  28. Applying nanofluid made by adding alumina nanoparticles to industrial oil may reduce the cutting force, friction, and cutting temperature and, from that, improve the tool life in the hobbing process. However, ...

    Authors: Minh Tuan Ngo, Vi Hoang and Sinh Vinh Hoang
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:6
    Content type: Original Paper Published on:

  29. Measurement of the ductility like elongation and reduction of area of the fine metal wire is important because of the progress for the weight reduction and miniaturization of various products. This study estab...

    Authors: Shiori Gondo, Shinsuke Suzuki, Motoo Asakawa, Kosuke Takemoto, Kenichi Tashima and Satoshi Kajino
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:5
    Content type: Original Paper Published on:

  30. In this paper, the heat and mass transfer of MHD nanofluid squeezing flow between two parallel plates are investigated. In squeezing flows, a material is compressed between two parallel plates and then squeeze...

    Authors: Kh. Hosseinzadeh, M. Alizadeh and D. D. Ganji
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:4
    Content type: Original Paper Published on:

    The Retraction Note to this article has been published in International Journal of Mechanical and Materials Engineering 2020 15:8

  31. Structure and properties of welded joints of low-alloy thermomechanically processed (09G2FB) and quenched and tempered shipbuilding steels (10XN2MD, 08XN3MD, and 12XN3MF), welded with manual metal arc welding ...

    Authors: Pavel Layus, Paul Kah, Elena Khlusova and Victor Orlov
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:3
    Content type: Original Paper Published on:

  32. This paper explores the impact of thermal radiation on boundary layer flow of dusty hyperbolic tangent fluid over a stretching sheet in the presence of magnetic field. The flow is generated by the action of tw...

    Authors: K. Ganesh Kumar, B. J. Gireesha and R. S. R. Gorla
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:2
    Content type: Review Article Published on:

  33. Metal forming has played a significant role in manufacturing development, thus investigations in the field of metal forming to improve the quality of the forming process are necessary. In the present study, th...

    Authors: Reza Bagheinia and Aazam Ghassemi
    Citation: International Journal of Mechanical and Materials Engineering 2018 13:1
    Content type: Original Paper Published on:

  34. Renewable energy resources are becoming more important to meet growing energy demands while reducing pollutants in the environment. In the current market, wind turbines are primarily restricted to rural use du...

    Authors: Cory Seidel, Sanjay Jayaram, Leah Kunkel and Alexander Mackowski
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:19
    Content type: Original Paper Published on:

  35. The present exploration deliberates the effect of nonlinear thermal radiation on double diffusive free convective boundary layer flow of a viscoelastic nanofluid over a stretching sheet. Fluid is assumed to be...

    Authors: K. Ganesh Kumar, B. J. Gireesha, S. Manjunatha and N. G. Rudraswamy
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:18
    Content type: Original Paper Published on:

  37. The gouging torch process using air carbon arc cutting (CAC) device is a standard maintenance procedure carrying out in high-tonne equipment used in the minery industry. The application of this process could l...

    Authors: H. Ochoa Medina, J. Leiva Yapur, O. Fornaro and Z. Cárdenas Quezada
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:16
    Content type: Original Paper Published on:

  39. Vanadium alloy is one of the potential candidate material for structural applications in a commercial fusion reactor. Extended survival of a structural material has a direct consequence on the net energy produ...

    Authors: Vinoadh Kumar Krishnan and Kumaran Sinnaeruvadi
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:14
    Content type: Original Paper Published on:

  40. One of the current problems in studying the mechanical properties and behavior of structurally inhomogeneous media with cracks is the characterization of acoustic wave propagation. This is especially important...

    Authors: Elena L. Kossovich, Alexey V. Talonov and Viktoria L. Savatorova
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:13
    Content type: Original Paper Published on:

  41. Side-impact collisions represent the second greatest cause of fatality in motor vehicle accidents. Side-impact airbags have been installed in recent model year vehicle due to its effectiveness in reducing pass...

    Authors: D. Bendjaballah, A. Bouchoucha, M. L. Sahli and J-C. Gelin
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:12
    Content type: Original Article Published on:

  42. Impedance pump is a simple valveless pumping mechanism, which transports fluid through the mismatch of impedance in the system. Mismatch in impedance occurs when an asymmetrical periodic excitation is exerted ...

    Authors: V. C. C. Lee, Y. A. Abakr and K. C. Woo
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:11
    Content type: Original Article Published on:

  43. Strain and stress conditions in sheet metal shearing are of interest for calibration of various fracture criteria. Most fracture criteria are governed by effective strain and stress triaxiality.

    Authors: E. Gustafsson, S. Marth, L. Karlsson and M. Oldenburg
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:10
    Content type: ORIGINAL ARTICLE Published on:

  44. The purpose of the study is to investigate the effects of variable fluid properties, the velocity slip and the temperature slip on the time-dependent MHD squeezing flow of nanofluids between two parallel disks...

    Authors: K. Vajravelu, K. V. Prasad, Chiu-On Ng and Hanumesh Vaidya
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:9
    Content type: Original Article Published on:

  45. The Saint-Venant problem for porous elastic cylinders is of interest both from the technical and mathematical point of view. The intended applications of solution are to mechanics of bone and to some engineeri...

    Authors: D. Ieşan
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:8
    Content type: ORIGINAL ARTICLE Published on:

  46. This paper presents a numerical study of heat transfer inside the adsorber-collector of a solar adsorption refrigerator using the activated carbon AC35-methanol pair. The objective is to estimate the amount of...

    Authors: Noureddine Cherrad, Adel Benchabane, Lakhdar Sedira and Amar Rouag
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:7
    Content type: Original Article Published on:

  47. The austenitic stainless steel 304L is widely used as a structural material for which the finished surface has significant effect on the service performance. A study of the grinding process with regard to the ...

    Authors: Nian Zhou, Ru Lin Peng and Rachel Pettersson
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:6
    Content type: Original Article Published on:

  48. In rubber elastic models it is generally assumed that the bulk modulus is infinite, resulting in a material that does not change its volume and a pressure that cannot be evaluated from the material model.

    Authors: Brice N. Cassenti and Alexander Staroselsky
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:5
    Content type: Original Article Published on:

  50. Attractive properties of TRIP-type bainitic ferrite (TBF) steel ascribe to its unique microstructure of lath structure bainitic ferrite matrix and interlath retained austenite films. This work is concerned wit...

    Authors: Hoda Nasr El-Din, Ezzat A. Showaib, Nader Zaafarani and Hoda Refaiy
    Citation: International Journal of Mechanical and Materials Engineering 2017 12:3
    Content type: Original Article Published on:
Submit manuscript

COVID-19 and impact on peer review

As a result of the significant disruption that is being caused by the COVID-19 pandemic we are very aware that many researchers will have difficulty in meeting the timelines associated with our peer review process during normal times.  Please do let us know if you need additional time. Our systems will continue to remind you of the original timelines but we intend to be highly flexible at this time.

Follow

Annual Journal Metrics

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline

  • ISSN: 3004-8958 (electronic)