Skip to main content
Journal of Materials Science: Materials in Engineering
Journal of Materials Science: Materials in Engineering Cover Image

Articles

Page 1 of 4

  1. The excellent clinical performance of yttria-partially stabilized zirconias (Y-SZs) makes them promising materials for indirect restorations. However, the Y-SZ phase stability is a concern, and infiltrating Y-...

    Authors: Najm M. Alfrisany, Eszter Somogyi-Ganss, Laura E Tam, Benjamin D. Hatton, Rana N. S. Sodhi, Ling Yin and Grace M. De Souza
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:30
    Content type: Original Paper Published on:

  2. Emerging challenge posed by multidrug-resistant Bacillus spp. phytopathogens on agriculture and their commodities exerts pressure on global food security. This mandates the search for other alternatives to existi...

    Authors: Dhanushwr Kumar, Ranjani Soundhararajan and Hemalatha Srinivasan
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:29
    Content type: Original Paper Published on:

  3. In this study, the performance of a-Si:H/μc-Si:H tandem solar cells was comprehensively assessed through two-dimensional numerical simulations. Our work involved optimizing the layer thicknesses and exploring ...

    Authors: Saeed Khosroabadi, Ramisa Eghbali and Anis Shokouhmand
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:28
    Content type: Original Paper Published on:

  4. Cement production for concrete is one of the main reasons why the building industry contributes significantly to carbon dioxide emissions. This paper investigates an innovative approach to utilizing CO2 by incorp...

    Authors: Sini Kushwah, Shweta Singh, Rachit Agarwal, Nikhil Sanjay Nighot, Rajesh Kumar, Humaira Athar and Srinivasarao Naik B
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:27
    Content type: Original Paper Published on:

  5. In the present work, the enhancement of photoinduced optical activity in a photosensitive nanolayer of AgCl doped by Ag nanoparticles, using bi-periodic crisscrossed self-organized periodic nanostructures (C-S...

    Authors: Arashmid Nahal and Ozra Kiasatfar
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:26
    Content type: Original Paper Published on:

  6. Porous solids are commonplace in engineering structures and in nature. Material properties are inevitably affected by the internal inhomogeneity. The effective thermal conductivity of porous materials has been...

    Authors: Yu-Lin Shen and Garrett Rose
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:25
    Content type: Original Paper Published on:

  7. Bismuth ferrite (BFO) nanoparticles have emerged as a non-toxic catalyst with remarkable potential for the photodegradation of various environmental pollutants. A notable departure from conventional approaches...

    Authors: Rahina M. K, Arun Krishna Kodoth, Manjunatha Pattabi, Murari M. S and Rani M. Pattabi
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:24
    Content type: Original Paper Published on:

  8. This paper presents the effect of size reduction of palm oil fuel ash (POFA) in the nanoscale to improve the mortar strength. In this work, three different particle sizes of POFA prepared using the LA abrasion...

    Authors: Yu Xuan Liew, Siti Asmahani Saad, N. Anand, Kong Fah Tee and Siew Choo Chin
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:23
    Content type: Original Paper Published on:

  9. This study presents a novel and eco-friendly approach for synthesizing silver nanocomposite at room temperature. The method utilizes chitosan derived from snail (Archachatina marginata) shell waste crosslinked wi...

    Authors: S. A. Atanda, R. O. Shaibu and F. O. Agunbiade
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:22
    Content type: Original Paper Published on:

  10. Polymer patterns are promising for many applications due to their high stability and superior chemical and physical properties. By functionalizing various surfaces with polymer patterns, it is possible to dete...

    Authors: Zehra Karaagac
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:21
    Content type: Original Paper Published on:

  11. Advancements in the load-bearing capacity of composite panels open doors to high-performance applications. The integration of additive manufacturing allows for the creation of intricate core designs effortless...

    Authors: Assil Charkaoui, Noha M. Hassan, Zied Bahroun and Mahmoud Ibrahim
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:20
    Content type: Original Paper Published on:

  13. This study investigates the utilization of Ti/Ni reactive multilayer foils as an energy source for facilitating the joining of Ni–Ti shape memory alloys through diffusion bonding. Multilayered samples were pre...

    Authors: Mohammad Mokhles, Seyed Mojtaba Zebarjad, Habib Danesh-Manesh and Tushar R. Dandekar
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:18
    Content type: Original Paper Published on:

  14. Cohesive flexible rectorite clay films with good mechanical performance were prepared by a simple casting method through the self-assembly of exfoliated natural clay from aqueous dispersions. The multi-layered...

    Authors: Maria T. Atanasova, Walter W. Focke and Theodor Loots
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:17
    Content type: Original Paper Published on:

  15. Due to their versatile properties and wide-ranging applications across various industries, including manufacturing, polymers are indispensable for today’s society. However, polymer-based products significantly...

    Authors: João Daniel Seno Flores, Thiago de Assis Augusto, Daniel Aparecido Lopes Vieira Cunha, Cesar Augusto Gonçalves Beatrice, Eduardo Henrique Backes and Lidiane Cristina Costa
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:16
    Content type: Original Paper Published on:

  16. In this paper, a shape memory alloy (SMA), NiTiNOL, zigzag sheet is used and experimental method is developed using programmable power supply, laser displacement sensor, and K-type thermocouple to investigate ...

    Authors: Suraj and Arun Kumar
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:15
    Content type: Original Paper Published on:

  17. Perovskite materials have emerged as promising candidates for next-generation photovoltaic devices due to their unique optoelectronic properties. In this study, we investigate the incorporation of bromine into...

    Authors: Khawla Fradi, Amal Bouich, Yousaf Hameed Khattak, Faisal Baig, Bechir Slimi, Bernabé Marí Soucase and Radhouane Chtourou
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:14
    Content type: Original Paper Published on:

  18. This work explores environmentally conscious machining practices for AISI4140 steel through Taguchi analysis. The study employs a design of experiments (DOE) approach, focusing on cutting speed, depth of cut, ...

    Authors: Pankaj Krishnath Jadhav and R. S. N. Sahai
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:13
    Content type: Original Paper Published on:

  19. Decellularized amnion (dAM)-derived hydrogels have been extensively exploited for versatile medical and therapeutical applications, particularly for soft tissue engineering of skin, vascular graft, and endomet...

    Authors: Golara Kafili, Elnaz Tamjid, Hassan Niknejad and Abdolreza Simchi
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:12
    Content type: Original Paper Published on:

  20. This paper presents a new method for detecting malathion pesticides using a modified screen-printed electrode (SPE) with a fluorescence quenching technique. The manganese-based MOF was synthesized using the so...

    Authors: Lakshya Sankhla and Himmat Singh Kushwaha
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:11
    Content type: Original Paper Published on:

  21. This study explores how expanded thermoplastic polyurethane (ETPU) responds to temperature and compression at various temperatures. Dynamic mechanical thermal analysis (DMTA) was used to understand the tempera...

    Authors: Johannes Meuchelböck, Carlo Peiffer, Lena Walter, Marcel Dippold, Peter Munro and Holger Ruckdäschel
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:10
    Content type: Original Paper Published on:

  22. To ascertain upon the ideal configuration of physico-mechanical qualities, efficient processing techniques, and network stability of the prepared bio-composite films in real-world applications, the polymeric m...

    Authors: Aritra Das, Muktashree Saha, Manish Kumar Gupta, Latha Rangan, Ramagopal Uppaluri and Chandan Das
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:9
    Content type: Original Paper Published on:

  23. On account of their unique shape memory effect (SME), pseudoelasticity, and biomedical applications, shape memory alloys (SMAs) have gained significant acceptance in the industrial trade and biomedical applica...

    Authors: S. Santosh and M. Pavithran
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:8
    Content type: Review Article Published on:

  24. CuMn2O4 (CMO) thin films are produced using a simple hydrothermal method. The influence of reaction duration on the electrodes’ electrochemical performance is investigated. XRD data shows improved crystal structu...

    Authors: Souha Aouini, Afrah Bardaoui, Ana M. Ferraria, Radhouane Chtourou and Diogo M. F. Santos
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:7
    Content type: Original Paper Published on:

  25. Thin films reinforced with chitosan and cellulose nanocrystals (CNC) were produced using the casting process. In this study, the impact of plasticisers and sizing agents such as glycerol and polyvinyl alcohol ...

    Authors: Rahul Varma and Sugumar Vasudevan
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:6
    Content type: Original Paper Published on:

  26. The insulating oil serves the dual purpose of providing insulation and cooling within transformers. This investigation aims to explore the impact of various nanoparticles on the dielectric breakdown voltage (B...

    Authors: Md Rizwan, Suhaib Ahmad Khan, M. Rizwan Khan and Asfar Ali Khan
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:5
    Content type: Original Paper Published on:

  27. Machine learning-driven automated replication micrographs analysis makes possible rapid and unbiased damage assessment of in-service steel components. Although micrographs captured by scanning electron microsc...

    Authors: Hamza Ghauri, Reza Tafreshi and Bilal Mansoor
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:4
    Content type: Original Paper Published on:

  28. La1-xCax(B1,B2,B3)O3 perovskite powders doped with calcium were synthesized and sintered. Calcium doping modified the A-site of the perovskite structure, while the B-site was composed of three cations in equal at...

    Authors: Sai Ram Gajjala, Geoffrey A. Swift and Rasit Koc
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:3
    Content type: Original Paper Published on:

  29. As the global agenda turns more towards the so-called challenge of climate change and lowering carbon emissions, research into green, renewable energy sources becoming nowadays more and more popular. Offshore ...

    Authors: Oleg Gaidai, Alia Ashraf, Yu Cao, Jinlu Sheng, Yan Zhu and Zirui Liu
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:2
    Content type: Original Paper Published on:

  30. Enabling gears to withstand loss of lubrication in gearboxes without secondary oil supply systems can reduce weight and space demand and thus fuel consumption. This study investigates the potential of surface ...

    Authors: B. Morhard, T. Lohner and K. Stahl
    Citation: Journal of Materials Science: Materials in Engineering 2024 19:1
    Content type: Original Paper Published on:

  31. Taguchi’s method was applied to investigate the effect of main high energy ball milling (HEBM) parameters: milling time (MT), ball to powder weight ratio (BPWR), and milling speed (MS) on the CaCO3 crystallite si...

    Authors: Maya Radune, Svetlana Lugovskoy, Yaniv Knop and Avigdor Yankelevitch
    Citation: International Journal of Mechanical and Materials Engineering 2022 17:1
    Content type: Original Paper Published on:

  32. The initial stability after implantology is paramount to the survival of the dental implant, and the surface roughness of the implant plays a vital role in this regard. The characterisation of surface topograp...

    Authors: L. Lebea, H. M. Ngwangwa, D. Desai and F. Nemavhola
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:16
    Content type: Review Article Published on:

  33. For the last couple of decades, researchers have been trying to explore eco-friendly materials which would significantly reduce the dependency on synthetic fibers and their composites. Natural fiber-based comp...

    Authors: M. S. Rabbi, Tansirul Islam and G. M. Sadiqul Islam
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:15
    Content type: Review Article Published on:

  34. This paper deals with the propagation of the plane wave in a nonlocal magneto-thermoelastic semiconductor solid with rotation. The fractional-order three-phase lag theory of thermoelasticity with two temperatu...

    Authors: Iqbal Kaur and Kulvinder Singh
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:14
    Content type: Original Paper Published on:

  35. The challenge encountered in continuous forming process is the variation in mechanical strength of product formed with respect to process variables like extrusion wheel speed and diameter of product. In this r...

    Authors: Tariku Desta, Devendra Kumar Sinha, Perumalla Janaki Ramulu and Habtamu Beri Tufa
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:13
    Content type: Original Paper Published on:

  36. In the last decade, computer-aided engineering (CAE) tools have become a determinant factor in the analysis of engineering problems. In fact, they bring a clear reduction of time in the design phase of a new p...

    Authors: Marco Nicola Mastrone and Franco Concli
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:12
    Content type: Original Paper Published on:

  37. In this paper, advanced finite element (FE) methods are developed to investigate the effect of deceleration on the crash dummy test complied with British Standard Engineering (BS EN 1789). These techniques, wh...

    Authors: A. Rabiee, H. Ghasemnejad, N. Hitchins, J. Watson, J. Roberts and M. Khoory
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:11
    Content type: Original Paper Published on:

  38. It is important to avoid buckling during low-cycle fatigue testing. The buckling load is dependent on the specimen shape, material properties, and the testing machine. In the present investigation of hourglass...

    Authors: Ragnar Gjengedal, Ørjan Fyllingen and Vojtech Heinik
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:10
    Content type: Original Paper Published on:

  39. Gearboxes are usually lubricated with oil or grease to reduce friction and wear and to dissipate heat. However, gearbox applications that cannot be lubricated with oil or grease, for example in the space or fo...

    Authors: Stefan Hofmann, Mustafa Yilmaz, Enzo Maier, Thomas Lohner and Karsten Stahl
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:9
    Content type: Original Paper Published on:

  40. In the present study, the effect of cone angle of tool pin on the mechanical properties and microhardness properties of aluminum alloy AA6061-T6 specimens is investigated for three processes of SFSW, symmetric...

    Authors: Mahdi Kazemi and Amir Ghiasvand
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:8
    Content type: Original Paper Published on:

  41. Calcium fluoride (CaF2) is widely used for different bio applications ranging from biomedical imaging to cell labeling. The biocompatible properties of CaF2 combined with superior mechanical properties of titaniu...

    Authors: A. Ritwik and K. K. Saju
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:7
    Content type: Original Paper Published on:

  42. Regional mechanics of the heart is vital in the development of accurate computational models for the pursuit of relevant therapies. Challenges related to heart dysfunctioning are the most important sources of ...

    Authors: Fulufhelo Nemavhola
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:6
    Content type: Original Paper Published on:

  43. One of the problem areas of fluid flow in the turbomachine is its inlet region, manifested by flow distortions due to the induced fluid swirl accompanied by improper flow incidence onto the impeller. Further, ...

    Authors: N. Madhwesh, K. Vasudeva Karanth and N. Yagnesh Sharma
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:5
    Content type: Original Paper Published on:

  44. The Poisson’s ratio, a property which quantifies the changes in thickness when a material is stretched and compressed, can be determined as the negative of the transverse strain over the applied strain. In the...

    Authors: James N. Grima-Cornish, Joseph N. Grima and Daphne Attard
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:4
    Content type: Original Paper Published on:

  45. An amendment to this paper has been published and can be accessed via the original article.

    Authors: Iqbal Kaur, Parveen Lata and Kulvinder Singh
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:3
    Content type: Correction Published on:

    The original article was published in International Journal of Mechanical and Materials Engineering 2020 15:10

  46. Laser surface hardening is rapidly growing in industrial applications due to its high flexibility, accuracy, cleanness and energy efficiency. However, the experimental process optimization can be a tricky task...

    Authors: L. Orazi, A. Rota and B. Reggiani
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:2
    Content type: Original Paper Published on:

  47. Ductile failure of polymeric samples weakened by circular arc cracks is studied theoretically and experimentally in this research. Various arrangements of cracks with different arc angles are considered in the...

    Authors: M. Pourseifi and A. S. Rahimi
    Citation: International Journal of Mechanical and Materials Engineering 2021 16:1
    Content type: Original Paper Published on:

  48. The aim of the present investigation is to examine the memory-dependent derivatives (MDD) in 2D transversely isotropic homogeneous magneto thermoelastic medium with two temperatures. The problem is solved usin...

    Authors: Iqbal Kaur, Parveen Lata and Kulvinder Singh
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:10
    Content type: Original Paper Published on:

    The Correction to this article has been published in International Journal of Mechanical and Materials Engineering 2021 16:3

  49. This is a study of the degradation of amorphous silicon solar cells. The study accessed structural defects and the mechanical stress of solar cells at nanoscale level. Interface morphology, deformation, and in...

    Authors: E. L. Meyer and G. O. Osayemwenre
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:9
    Content type: Original Paper Published on:

  50. An amendment to this paper has been published and can be accessed via the original article.

    Authors: Kh. Hosseinzadeh, M. Alizadeh and D. D. Ganji
    Citation: International Journal of Mechanical and Materials Engineering 2020 15:8
    Content type: Retraction Note Published on:

    The original article was published in International Journal of Mechanical and Materials Engineering 2018 13:4

Submit manuscript

COVID-19 and impact on peer review

As a result of the significant disruption that is being caused by the COVID-19 pandemic we are very aware that many researchers will have difficulty in meeting the timelines associated with our peer review process during normal times.  Please do let us know if you need additional time. Our systems will continue to remind you of the original timelines but we intend to be highly flexible at this time.

Follow

Annual Journal Metrics

Latest Tweets

Your browser needs to have JavaScript enabled to view this timeline

  • ISSN: 3004-8958 (electronic)